YOU ARE NOT ON THIS NETWORK
🇮🇳 ACT Fibernet
ACT Fibernet is India's largest pure-play fiber broadband provider, operating in 19 cities across southern and western India with speeds up to 1 Gbps.
Privacy on ACT Fibernet
India has a partly free internet with some restrictions (internet freedom 3/5). VPNs are fully legal to use, and there is no mandatory data-retention requirement for ISPs. Online censorship is rated moderate. India privacy details →
Find Your ACT Fibernet IP Address
Your public IP is assigned by ACT Fibernet when your router or device connects, typically through DHCP or PPPoE — it is not printed anywhere on your device. The Your IP card above shows the address your current connection is using right now; for full details (location, ASN, network type, VPN detection) run the HackMyIP check or look any address up with IP Lookup. Consumer plans typically get a dynamic address that can change on reconnect or lease renewal — see static vs dynamic IP.
ACT Fibernet DNS Servers
Your router receives ACT Fibernet resolver addresses automatically over DHCP when it connects, so most customers never configure DNS at all. The exact resolver addresses vary by region and plan — check your router admin page for the values in use, or run the DNS leak test to see which resolver is answering your queries right now. Whichever resolver you use can see every domain you look up, which is why many people switch to a public resolver: see the best DNS servers compared and what your ISP can see. Some ISP-supplied routers do not allow changing DNS; in that case set it per device instead.
Does ACT Fibernet Use CGNAT?
Whether your line sits behind carrier-grade NAT depends on your plan and region, so check it yourself: compare your router WAN address with the public IP shown above. If they differ, or the WAN address falls in 100.64.0.0/10 (the shared range RFC 6598 reserves for CGNAT), you are behind CGNAT — one public IP shared by many customers, which matters for port forwarding, hosting a server, and some games. Many providers, and most mobile networks, deploy it. Classify any address with the Special-Use IP Checker or read what CGNAT is.
ACT Fibernet IP Ranges — AS55457
ACT Fibernet announces its public IP ranges under ASN 55457 in the global BGP routing table, so addresses in those prefixes trace back to this network. Browse the announced prefixes on the AS55457 page, look up a single address with IP Lookup, or read what an ASN is.
FAQ
What is ACT Fibernet ASN?
ACT Fibernet operates under ASN 55457. This Autonomous System Number identifies their network globally.
Is ACT Fibernet good for privacy?
ACT Fibernet operates in India, which has no mandatory data-retention law, so it is not legally required to log your browsing. A VPN keeps your traffic private regardless of provider policy.
What speed does ACT Fibernet offer?
Connection speeds on ACT Fibernet depend on your specific plan, the access technology (fiber, cable, DSL, or mobile), and your location. For an accurate figure, run a speed test on your own connection.
How do I check if an IP address belongs to ACT Fibernet?
Look the address up and check its ASN and organization: ranges ACT Fibernet announces under ASN 55457 appear in the global BGP routing table. Use the HackMyIP IP Lookup for a single address, or browse the prefixes announced under AS55457 on the ASN page.
How do I find my ACT Fibernet IP address?
Your public IP is assigned by ACT Fibernet when your router or device connects, typically through DHCP or PPPoE, so it is not printed anywhere on your device. The fastest way to see it is an external check, which shows the address the rest of the internet sees. The Your IP card on this page shows the address your current connection is using right now.
What DNS servers does ACT Fibernet use?
Your router receives ACT Fibernet resolver addresses automatically over DHCP, and the exact addresses vary by region and plan, so check your router admin page for the values in use. You can also run a live DNS leak test to see which resolver is answering your queries right now, and replace the ISP resolvers with a public resolver on your router or per device.
Does ACT Fibernet use CGNAT?
That depends on your plan and region, so check your own line: compare your router WAN address with the public IP shown on this page. If they differ, or the WAN address falls between 100.64.0.0 and 100.127.255.255 (the shared range RFC 6598 reserves for carrier-grade NAT), you are behind CGNAT. Many providers, and most mobile networks, use CGNAT to share one public IP among many customers.
Why does my ACT Fibernet IP address keep changing?
Consumer ISPs typically assign dynamic public IPs with a limited lease, and address pools are reused as leases expire, so a reconnect, a router reboot, or a lease renewal can hand you a different address. If you need an address that never changes, ask ACT Fibernet whether your plan supports a static IP.
Other ISPs in India
Check IP by City in India
Related Guides